Riverstone Networks RS 8000 Manuale dell'Operatore Pagina 73

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 72
Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide 2-49
Introduction Hardware Overview
Figure 2-34 LFH-60 high density connector
The Quad Serial – C/CE line cards use the following LEDs.
Dual HSSI Line Card
The Dual HSSI line card contains two 50-pin High Speed Serial Interface (HSSI) ports. Figure 2-35 shows the front
panel of the Dual HSSI WAN line card.
Figure 2-35 Front panel of Dual HSSI WAN line card
The following table lists the media specifications for the Dual HSSI line card.
Table 2-45 LED description for quad serial line card
LED Description
Offline When lit, this amber LED on the left side of the line card indicates that the line
card is offline (powered off) but is ready for hot swap.
The Offline LED also is lit briefly during a reboot or reset of the RS but goes
out as soon as the Control Module discovers the line card.
Online When lit, this green LED indicates that the line card is online and is ready to
receive, process, and send packets if configured to do so.
Per-port Link Indicates that the line card detects a cable plugged into the port and a good
link is established.
Per-port Rx Indicates when the port’s transceiver receives data.
Per-port Tx Indicates when the port’s transceiver transmits data.







Tx
Rx
Link
Dual HSSI
G8M-HSIAC-02
Tx
Rx
Link
Online
Offline
Hot
Swap
Vedere la pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 157 158

Commenti su questo manuale

Nessun commento